How To Get Water Out Of Phone Charging Port

It can be quite an anxiety moment when your phone unknowingly gets water into its charging port. Water in this sensitive area can cause problems, such as the phone not charging, malfunctioning ports, or even permanent damage. Fret not. This article will walk you through various steps to get water out of a phone charging port.

Phone users should turn off their phones, remove any accessories, pat dry the phone exterior, shake their phones gently, use a soft cloth or tissue, and allow the phone to air dry. They must also use a fan or air blower, try silica gel packets, wait 24 hours before charging, and avoid certain things to remove water from their phone charging port.

9 Steps to Get Water Out of Phone Charging Port

Water is an excellent conductive fluid that can easily cause a short circuit when it meets electronic components. The time spent with water in the port increases the likelihood of corrosion, eventually damaging something in the long run. That’s why acting fast matters when removing water from the port. So, here are steps to remove water from the charging port of a phone:

1. Turn Off Your Phone

Switch it off immediately when water enters your phone’s charging port. If you don’t, you may damage its internal electrical components, which can short-circuit due to water contact. Taking this step will ensure that your phone isn’t further damaged.

2. Remove Any Accessories

First, remove all accessories connected to your phone, such as the charging cable, headphones, and others. This will prevent further water damage and help dry your phone more easily. If the battery can be easily accessed, remove it from your phone. This will help prevent the flow of electric current through the device and help fix a water-damaged charging port.

3. Pat Dry the Phone Exterior

Pat the phone’s exterior gently with a lint-free, soft cloth. This will remove excess water droplets from the outer surface and help prevent extra moisture from accumulating in the charging port. Avoid pressing too hard on your phone, which may push the water into the internal components.

4. Shake Your Phone Gently

Next, holding the phone upside down so that the charging port faces downwards, gently shake it a little to loosen the water in the charging port so that gravity can help pull out the moisture locked inside. Hold and shake gently to get water out of the phone charging port because you don’t want to shake it too hard.

5. Use a Soft Cloth or Tissue

Wipe the general charging port area clean with a soft cloth or tissue. This leaves any water remaining on the charging port’s exterior but does nothing to dry the inside. Do not put anything into the port at this time, as that may cause it to force water farther inside your phone.

6. Allow the Phone to Air Dry

Another safe method of drying your phone’s charging port is air drying, which does not involve risking your phone. You should place your phone in a well-ventilated area, ensuring the charging port is facing downward to allow moisture to get out of the phone charging port.

7. Use a Fan or Air Blower

Sometimes, placing a fan or a light air blower beside the phone can greatly accelerate the drying process. Keep the fan so close to the phone that the air blows into the charging port. Remember that the air blows should not be too intense since strong airflow might push it deeper into the phone rather than drawing it out.

8. Try Silica Gel Packets

If you have silica gel packets among those that come with new shoes, bags, or electronic gadgets, you might use those. Seal the phone in an airtight container with lots of silica gel packets and let it sit for several hours or overnight to fix the water-damaged charging port.

9. Wait 24 Hours Before Charging

Wait for at least 24 hours after carrying out the abovementioned procedures before you try to charge your phone. This ensures that any water left in the charging ports has ample time to dry up. Even if you feel your phone has dried, water can continue sticking in those places you can’t reach. Charging your phone too soon can cause short circuits, and if damage occurs, you may need a charging port replacement to restore functionality.

How long does it take for a charging port to dry?

The time it takes for a charging port to dry can vary depending on the type of phone and the amount of water exposure. A charging port can take 30 minutes to several hours to dry completely.

How To Get Water Out of Phone Charging Port?

To get water out of the phone charging port, use a can of compressed air to blow out any visible water droplets. Hold the can upside down and spray the port gently to avoid pushing water further in.

How can water damage the phone charging port?

Water can damage the phone’s charging port by seeping into the tiny crevices and corroding the internal components, causing short circuits and permanent damage.

Conclusion

Water in your phone’s charging port can be stressful, but quick action and following the proper steps can prevent permanent damage. To get water out of the phone charging port, users should turn off the phones, remove all peripherals, tap dry the phone case, shake their phones gently, use a clean cloth or tissue paper, and air dry their phone.

That is not it; they should operate a fan or air blower, try silica gel packets, wait 24 hours before charging, and avoid certain things if water has penetrated their phone charging port. If the problem persists, you may need professional phone repair services. You can also contact experts like Cell n Tech for assistance.