How to Fix Hard Reset Ps5 Controller Not Working Issue

The PS5 has shifted the gaming world with what it does and possesses. As with any technological device, sometimes the worst can happen. Amongst the most commonly reported issues that users of the PS5 face is a malfunctioning DualSense controller. Although the device is reliable, it may sometimes fail and act erratically to cause connectivity, input lag, or even become unresponsive for your game. Most of these issues can be solved with a hard reset on the PS5 controller.

To fix the hard reset PS5 controller not working issue, ensure it has sufficient battery power. Locate the tiny reset button on the back, near the L2 button, and press it for 5 seconds with a small object like a paper clip. After resetting, connect the controller to the PS5 via USB-C and press the PS button to repair it. If the issue persists, consider seeking professional game console repair to diagnose and resolve any underlying problems.

4 Steps to Fix Hard Reset Ps5 Controller Not Working Issue

Fixing a non-working hard reset PS5 controller is quite a simple process. To do this, here’s the step-by-step procedure:

1. Prepare Before a Hard Reset of Your PS5 Controller

Make sure your DualSense controller’s battery is charged before performing the hard reset. If running low, charge it through the USB-C cable attached to the PS5 console or any other port to ensure none of the resetting processes are interrupted.

2. Locate the Reset Button

The reset button is a tiny pinhole at the back of your DualSense controller. Here’s how to spot it:

• Flip your controller over to show the back.
• Check around the L2 (left trigger) button.
• Look for a teensy-weensy, pinhole-sized opening.

3. Reset the Controller

Now that you have located the reset button, continue reading these steps

• You can use a small pointed object such as a paper clip, a sewing needle, or an ejector SIM card tool.
• Insert the pointy object into the small hole and gently press it down.
• Press and hold the button for around 5 seconds. 
• You will feel a click or see the controller light flash, showing that the reset was successful this time.
• Release the button.

4. Re-Pair the Controller

You also have to reconfigure your PS5 controller with the console again.

• Connect your controller using USB-C to the console.
• Then press the PS button on your controller for a long time. It should automatically pair.
• When paired, you can unplug the USB connector, and you can now use your controller wirelessly.

5 Advanced Troubleshooting Tips To Fix Hard Reset Ps5 Controller

If the hard reset doesn’t fix the issue, try these additional steps:

1. Update Controller Firmware

• Update your PS5 console software.
• Connect the controller to your PS5 via USB.
• Go to Settings > Accessories > Controllers > Wireless Controller > Update.

2. Check for Physical Damage

• Look closely for visible damage around buttons, sticks, and charging ports. 
• If something is damaged, contact professionals at console repair shops.

3. Test on Another Device

Connect the controller to a PC or another PS5 to avoid testing particular problems with your console.

4. Reset the Console’s Bluetooth Devices

If pairing issues persist, you may have to reboot the PS5’s Bluetooth settings:

• Open Settings > Accessories > Bluetooth Accessories.
• Forget all devices and then re-pair the controller.

5. Perform a Console Factory Reset

• To factory reset your PS5, go to Settings > System > System Software > Reset Options > Reset Your Console.
• Ensure all important data is saved beforehand because this step cannot be reversed.

5 Reasons Why Hard Reset is Required for Your PS5 Controller

Here are a few reasons to hard reset the PS5 controller.

1. Connectivity Issues: Your PS5 controller is not connecting or is constantly disconnecting from the console.
2. Unresponsive Buttons: Your PS5 controller’s buttons have become unresponsive and will not work as expected. This may be due to software or other reasons.
3. Input Lag: There is a big delay between making an input and the corresponding action on the screen. Sometimes, a hard reset will sync things up again.
4. Controller Pairing Problems: The user may need a hard reset if the controller can’t connect with another PS5 console or device (PC).
5. Software Updates: If you have updated your PS5 console and controller, you must perform a hard reset to complete the process.

Will a hard reset fix the drift problem of your PS5?

Sometimes, a simple controller freeze for a few seconds or minutes may help to fix PS5 controller drift by minimizing issues such as stick sensitivity or interference caused by a software problem. Restarting the controller can often resolve minor glitches effectively.

• A hard reset is ineffective for stick drift issues that result from wear on the stick’s physical hardware, dust, or faulty sensors.
• If the drift is still present after trying the hard reset, then one should clean the controller’s analog sticks or calibrate the sensors.
• Sometimes, you may have to call in a professional repair or even replacement if the problem persists since stick drift is a known problem affecting controllers’ lifespan.

What will happen when you hard reset your PS5?

A hard reset on your PS5 controller restores it to default settings by clearing its pairing information and resolving minor connectivity issues.

• First, it restores the DualSense controller to its factory default settings, clearing any connection issues or glitches it may have been experiencing.
• This can resolve problems like unresponsive buttons, lag, or disconnection.
• The hard reset clears the controller’s previous pairing with the console, so re-pairing may be necessary if it doesn’t automatically reconnect.
• However, it is important to note that a hard reset does not affect the PS5 console or any of your saved data on the system.
• It solely targets the controller’s settings.

Conclusion

Understanding can significantly enhance your ability to troubleshoot and resolve PS5 controller that is not working issues quickly. To troubleshoot problems concerning your PS5 controller, begin by charging its batteries. Then, proceed to the back, look for the tiny reset button near the L2 button, and press it using a paper clip for about 5 seconds.

Then, reconnect the controller via USB-C to the PS5 and tap the PS button to enable re-pairing. Sometimes, the issue can be caused by a hardware problem that might require professional repairs by technicians at shops like CellNtech.